Maintenance
Body and Framework
65 9831/3200-3 65
Body and Framework
General
Check (Condition)
1. Make sure that all of the guards and protective devices are in position, secured by their locking devices
and free from damage.
2. Inspect all of the steelwork for damage. Include the following:
2.1. Examine all of the pivot point welds.
2.2. Examine the condition of all the pivot pins.
2.3. Check that the pivot pins are correctly in position and secured by their locking devices.
3. Check the steps and guardrails are undamaged and correctly attached.
4. Check that all of the safety and instructional labels are undamaged and in position. Install new labels where
necessary.
5. Note any damaged paintwork for future repair.
6. Inspect the machine for broken or loose fasteners.
7. Raise the platform until pot hole protection is activated. Check the condition of the pot hole protection bars.
To Next Page
Loading...
Need help?
General
