27 - Driveline
06 - Semi-Automatic Gearbox
13 - Clutch - Master
27 - 132 9813/6850-2 27 - 132
Figure 573.
M Clutch drum bolts (x12)
N Plug1
P M8 threaded lifting eye (x2)
Q Clutch drum
13. Remove the locking plate.
14. Install the M8 threaded lifting eyes to the clutch
drum.
15. Attach suitable lifting equipment to the clutch
drum.
16. Carefully remove the clutch drum, hub and the
pressure plate assembly.
17. Install the special pack retainers to the clutch
plate carrier.
Special Tool: Clutch Pack Retainers (Qty.: 2)
Figure 574.
R Special pack retainers (x2)
S Clutch plates
T Thrust washer1
U Plate carrier
V Thrust washer2
18. Remove the carrier together with the clutch
plates and the thrust washer1.
19. Remove the thrust washer2.
20. Remove the button head capscrews.
21. Remove the oil baffle plate.
22. Rotate the drum carrier to align the five holes with
countersunk capscrews.
23. Remove the countersunk capscrews.
To Next Page
Loading...
