Need help?Do you have a question about the JCM DBV-400 Series and is the answer not in the manual?
Safety symbols and warnings for handling the device.
Details on acceptance rate, banknote types, speed, and interface.
Steps for physically installing the DBV-400 Unit onto a chassis.
Procedures for calibrating unit sensors with/without reference paper.
Detailed steps for performing various operational tests using PC software.
Lists common fault conditions and required corrective actions.
Safety symbols and warnings for handling the device.
Details on acceptance rate, banknote types, speed, and interface.
Steps for physically installing the DBV-400 Unit onto a chassis.
Procedures for calibrating unit sensors with/without reference paper.
Detailed steps for performing various operational tests using PC software.
Lists common fault conditions and required corrective actions.
General| Type | Bank Note Validator |
|---|---|
| Interface | RS-232, USB |
| Note Capacity | 200 notes |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 60°C |
| Stacker Capacity | 200 notes |
To Next Page
