JCM DBV Series - User Manual

© 2016, JAPAN CASH MACHINE CO., LTD.
Website: http://www.jcmglobal.com
Issue #4107-SME-01-01
DBV
®
Series
DBV-400
Banknote Validator
Operation and Maintenance
Manual
(Revision 1)
P/N 960-000180R_Rev. 1 {EDP #233427}

JCM DBV Series Specifications

General

Communication Interface	RS-232, USB
Operating Voltage	12V DC
Operating Temperature	0°C to 45°C
Note Width	62 - 85 mm
Storage Temperature	-20°C to 60°C

Summary

General Information

Safety Precautions and Handling

Outlines safety instructions, user cautions, and installation guidelines.

Primary Features and Specifications

Installation and Configuration

Installation Procedures

DIP Switch Settings

Configuration settings for DIP Switch Blocks 1 and 2.

Connector Pin Assignments

Preventive Maintenance and Cleaning

Disassembly and Reassembly

Component Removal Procedures

Detailed steps for removing unit components.

Wiring Diagrams

Calibration and Testing

Setup and Software Installation

Calibration Procedures

Step-by-step guide for sensor calibration.

Performance Test Procedures

Instructions for various performance tests on the unit.

Troubleshooting

Overview and Introduction

Fault Condition Analysis

Lists and explains fault conditions and corrective actions.

LED Error and Reject Codes

Details LED indications for errors and rejects.