JCM GEN2U Training Overwiev

Part No. 960-000192R_Rev. A © 2017 JCM American Corporation
3
August, 2017 JCM® Training Overview GEN2U™ Printer
OVERVIEW
This training course addresses the following JCM GEN2U models:
GEN2U P RINTER U NIT
Figure 1 illustrates the GEN2U Printer Unit.
Table 1 GEN2U Printer Versions
Device Version Difference
GEN2U RS-232, Netplex, USB
NOTE: The GEN2U (Universal) protocol is configured with Firmware. The firmware
determines the protocol and speed.
Figure 1 Typical GEN2U Printer Unit
GEN2U Unit
NOTE: For GEN2U Printer Component Locations, refer to Page 4.

JCM GEN2U Specifications

General

Interface	USB, Serial, Ethernet
Connectivity	USB, Serial, Ethernet
Print Resolution	203 DPI
Print Speed	250 mm/s
Print Technology	Direct Thermal
Supported Barcode Types	Code39, Code128, UPC-A, UPC-E, EAN-8, EAN-13, Codabar, QR Code, PDF417