Jconcepts BJ4 - Final Assembly and Body Trimming

BODY TRIMMING AND COMPLETED ASSEMBLY:
1. CUT OUT THE BJ4 BODY ALONG THE CUT LINES USING LEXAN SCISSORS. THEN DRILL OUT THE LOCATIONS
FOR THE BODY MOUNTS. MOUNT THE BODY USING THE INCLUDED LARGER STYLE BODY CLIPS (LOSI).
WHEN THE BODY IS CUT OUT, IT HAS THE TENDENCY TO FLARE OUT. FLEX THE BODY AT BOTH ENDS TO HELP
IT REGAIN ITS NATURAL SHAPE. IT SHOULD FIT CLOSE TO THE SIDES OF THE CHASSIS.
STEP 4