EasyManua.ls Logo

Jeep 2002 WJ - STEERING - 2.7 L - DIESEL; PUMP

Jeep 2002 WJ
291 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STEERING - 2.7L - DIESEL
TABLE OF CONTENTS
page
PUMP ..................................1
PUMP
TABLE OF CONTENTS
page page
PUMP
REMOVAL .............................1
INSTALLATION ..........................2
RESERVOIR
REMOVAL .............................2
INSTALLATION ..........................2
PULLEY
REMOVAL .............................3
INSTALLATION ..........................3
HOSES
REMOVAL
REMOVAL - PRESSURE HOSE - PUMP TO
THE HYDRAULIC FAN MODULE ...........3
REMOVAL - RETURN HOSE - RESERVOIR
TO THE HYDRAULIC FAN MODULE ........3
REMOVAL - PRESSURE HOSE - GEAR TO
THE HYDRAULIC FAN MODULE ...........3
REMOVAL - RETURN HOSE - RESERVOIR
TO THE PUMP ........................4
REMOVAL - 3/8” GEAR OUTLET HOSE ......4
REMOVAL - INLET COOLER HOSE .........4
REMOVAL - OUTLET COOLER HOSE .......4
INSTALLATION
INSTALLATION - PRESSURE HOSE PUMP
TO THE HYDRAULIC FAN MODULE ........4
INSTALLATION - RETURN HOSE -
RESERVOIR TO THE HYDRAULIC FAN
MODULE .............................5
INSTALLATION - PRESSURE HOSE - GEAR
TO HYDRAULIC FAN MODULE ............5
INSTALLATION - RETURN HOSE -
RESERVOIR TO THE PUMP ..............5
INSTALLATION - 3/89 GEAR OUTLET HOSE . . 5
INSTALLATION - INLET COOLER HOSE .....5
INSTALLATION - OUTLET COOLER HOSE . . . 5
PUMP
REMOVAL
(1) Open the hood and disconnect the negative bat-
tery cable.
(2) Remove the intercooler outlet hose from the
vehicle.
(3) Remove the battery. Refer to the electrical sec-
tion.
(4) Siphon and drain the fluid from the pump.
(5) Remove the accessory drive belt from the power
steering pump pulley. Refer to Cooling System for the
procedure.
(6) Install a allen wrench in the power steering
pump center shaft to hold the pump in position.
Remove the (3) power steering pump pulley retaining
bolts (Fig. 1).
(7) Remove the power steering pump pulley from
the pump.
(8) Remove the power steering fluid supply hose
from the pump (Fig. 2).
(9) Remove the power steering fluid pressure line
from the pump (Fig. 2).
(10) Remove the power steering pump to the
mount and remove the pump from the vehicle.
WG STEERING - 2.7L - DIESEL 19a - 1

Table of Contents

Related product manuals