344 MULTIMEDIA
Customer Programmable Features —
Uconnect 4 Settings
Uconnect 4 With 7-inch Display Buttons On The
Touchscreen And Buttons On The Faceplate
Push the Settings button on the touchscreen to
display the settings menu screen. In this mode,
the Uconnect system allows you to access all of
the available programmable features.
NOTE:
Only one setting can be selected on the touch-
screen at a time.
When making a selection, press the button on
the touchscreen to enter the desired menu.
Once in the desired menu, press and release
the preferred setting and make your selection.
Once the setting is complete, either press the
Back Arrow/Done button on the touchscreen or
the Back button on the faceplate to return to the
previous menu. Pressing the Up or Down Arrow
buttons on the right side of the screen will allow
you to toggle up or down through the available
settings.
NOTE:
All settings should be changed with the ignition
in the ACC position.
The following tables list the settings that may be
found within the Uconnect 4 system, along with
the selectable options pertaining to each
setting.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
20_BV_OM_EN_USC_t.book Page 344
To Next Page
Loading...
