Jeep UNIVERSAL CJ-2A - Page 7

A
GENERAL DATA
--------------------------------------
A-12. Ignition Coil
Ignition coils are identified by the manufacturer's
model number stamped on the coil housing bt>low
the top flange, as shown in Fig. 9.
.. ·;,.
FIG. 9-IGNITION COIL
MODEL NUMBER LOCATION
A-13. Distributor
Ignition distributors are identified by the manu-
factprer's model number stamped on a plate at-
tached to the distributor housing, as shown ~n:Fig.
10.
FIG. 10-DISTRIBUTOR
MODEL NUMBER LOCATION
A-14. Radiator
Radiators are identified by markings on the top
tank, usually on the top or rear face, as shown in
FIG. 11-RADIATOR MODEL NUMBER LOCATION