How to fix a Jensen AWM968BK Car Receiver that will not turn on?
If your Jensen Car Receiver radio won't turn on or the front panel isn't working, try pressing the reset button. Also, check the fuse, the 12V+ on the battery wire (YELLOW wire), the 12V+ on the accessory wire (RED wire), and the ground connection.
What to do if my Jensen Car Receiver has no sound?
If your Jensen Car Receiver turns on but you're not getting any sound, first check that the volume, fader/balance, and mute controls are properly adjusted. You can also try the reset button. Make sure the speaker selection and connections are correct. Check the speaker wires for shorts or open circuits. If there's a short on the "A" channel, the "B & C" channels will still work. If there's a short on the "B and/or C" channels, the "A" channel will still work.
Why is there no AM/FM reception on my Jensen Car Receiver?
If your Jensen Car Receiver isn't picking up AM or FM stations, first make sure you're tuned to a valid station. Check the antenna connection on the back of the stereo. If that doesn't work, try using a different antenna.
How to fix Jensen AWM968BK Car Receiver when DVD plays sound but no video?
If your Jensen Car Receiver DVD player plays sound but no video, ensure the video cable is connected from the video output (yellow RCA) to the input on your television.
What to do if wired remote control is not functioning on Jensen Car Receiver?
If your Jensen Car Receiver's wired remote control isn't working, try pressing the reset button. Check that the remote is securely connected to the radio, either directly or via an extension cable. If using an extension cable, try connecting the remote directly to the radio. If it works then, the extension cable is likely damaged and needs replacement. If it still doesn't work, the remote itself might be defective and need replacing. Also, make sure you're using a compatible remote (MWR75).
Why is my Jensen AWM968BK not responding to the remote control?
If your Jensen Car Receiver isn't responding to the remote control, make sure there's a clear line of sight for the IR signal. Check the batteries in the remote. If applicable, confirm the remote's IR sensor is plugged into the IR input.
What to do if CD/DVD does not load fully in Jensen Car Receiver?
If your Jensen Car Receiver CD/DVD isn't loading fully, ensure the unit has power and that no other CD/DVD is currently inside. Also, check that the transport screw has been removed from the rear of the unit. If the transport screw is not removed, the disc will load for a few seconds and then eject.
How to troubleshoot CD/DVD playback issues on my Jensen Car Receiver?
If your Jensen Car Receiver CD/DVD isn't playing correctly, first make sure the disc is inserted correctly and is free from dirt and scratches. Try playing factory CDs. Inspect the radio’s chassis to verify shipping screw(s) have been removed. Check factory original CDs for compatibility warnings (due to various copy-protection, multimedia content, etc.).
What to do if Jensen Car Receiver does not turn on?
If your Jensen Car Receiver is not turning on or the front panel is not working, try the reset button. Also, check the fuse, the 12V+ on the battery wire (YELLOW wire), the 12V+ on the accessory wire (RED wire), and the ground connection.
Why is there no sound coming from my Jensen AWM968BK?
If your Jensen Car Receiver turns on but produces no sound, first check that the volume, fader/balance, and mute controls are correctly set. Also, verify proper speaker selection and connections. Try the reset button. Check for shorts or open circuits on the speaker wires. If there is a short on the “A” channel, the “B & C” channels will continue to function. If there is a short on the “B and/or C” channels, the “A” channel will continue to function.
General| Brand | Jensen |
|---|---|
| Model | AWM968BK |
| Category | Car Receiver |
| Language | English |
To Next Page