Jensen AWM968BK - User Manual

Questions and Answers

R
revansSep 8, 2025
How to improve AM/FM reception on Jensen Car Receiver?
- M
  Michael ChenSep 8, 2025
  To improve AM or FM reception on your Jensen Car Receiver, verify that you are tuned to a valid station. Check your antenna connection on the rear of the stereo. You can also try using a different antenna.
K
Kathy HughesSep 10, 2025
What to do if Jensen AWM968BK remote control is not working?
- H
  Heather CampbellSep 10, 2025
  If your Jensen Car Receiver is not responding to the remote control, ensure you have a clear line of sight for the IR signal. Check the batteries in the remote. Also, confirm that the remote IR sensor is plugged into the IR input, if applicable.
G
Gilbert HarrisonSep 12, 2025
What to do if CD/DVD does not play correctly on Jensen AWM968BK Car Receiver?
- M
  Michael LeSep 12, 2025
  If your CD/DVD does not play correctly on your Jensen Car Receiver, check to make sure the disc is inserted correctly. Verify the disc is free from dirt and scratches. Try playing factory CDs. Inspect the radio’s chassis to verify shipping screws have been removed. Check factory original CDs for compatibility warnings due to various copy-protection, multi-media content, etc.
F
franklindavisSep 13, 2025
How to fix a non-functioning wired remote control on Jensen AWM968BK Car Receiver?
- C
  Courtney AlvaradoSep 14, 2025
  To fix a wired remote control that is not functioning on your Jensen Car Receiver: 1. Try the reset button. 2. Verify the remote is securely connected to the radio directly or via extension cable. 3. If using an extension cable, try connecting directly to the radio; if it works, the extension cable is likely damaged and should be replaced. 4. If the remote still does not work when connected directly to the radio, the remote could be defective and should be replaced. 5. Verify a compatible remote is used; only the MWR75 is compatible.
B
Barbara CookSep 15, 2025
What to do if Jensen AWM968BK Car Receiver CD/DVD does not load fully?
- Z
  Zoe IngramSep 15, 2025
  If the CD/DVD does not load fully in your Jensen Car Receiver, make sure the unit has power and that no other CD/DVD is currently inside. Also, ensure the transport screw has been removed from the rear of the unit; the disc will load for several seconds and then eject if the transport screw has not been removed.
E
Eduardo KingSep 18, 2025
Why does my Jensen AWM968BK DVD play sound but no video?
- P
  phammichaelSep 18, 2025
  If your Jensen Car Receiver DVD plays sound but no video, ensure that the video cable is routed from the video output (yellow RCA) to the input on the television.