What to do if my Jensen CD-540 CD Player will not play?
Ensure the unit is in CD function mode and that the CD is inserted with the label side up. If using a self-compiled CD, the media used may not be compatible with the player. Use better quality blank media and retest.
What to do if my Jensen CD-540 CD Player skips while playing?
If your Jensen CD Player skips, the disc might be dirty or scratched. Try wiping the CD with a clean cloth or using another disc.
Why is there noise or sound distorted on AM or FM broadcast on my Jensen CD-540?
The station might not be tuned properly for AM or FM. For FM, make sure the telescopic antenna is fully extended. For AM, reposition the unit until you get the best reception and fine-tune the AM or FM broadcast station.
What to do if there is intermittent sound from my Jensen CD-540?
The disc may be dirty or defective, or the pick-up lens might be dirty, or the player is subject to excessive shock or vibration. Clean or replace the defective disc. Use a CD-lens cleaning disc to clean the lens. Relocate the player away from shock or vibration.
How to fix distorted sound on playback with my Jensen Cassette Player?
The tape may be defective, or the tape head might be dirty. Try replacing the tape or cleaning the tape head.
Why AM or FM has no sound on my Jensen CD Player?
The unit might not be in Tuner mode, AM or FM band, or the volume is at minimum. Slide the function selector to select AM or FM. Increase the volume.
What causes sound distortion in my Jensen Cassette Player?
A dirty tape head can cause sound distortion. Clean the head.
How to fix speed variations on my Jensen Cassette Player?
The tape may be old or worn, or the roller and capstan might be dirty. Replace the tape, and clean the roller and capstan.
Why Jensen Cassette Player has no sound?
The unit may not be in TAPE function mode, or the volume is at minimum. Slide the function selector to TAPE and increase the volume.
General| Disc Compatibility | CD, CD-R/RW |
|---|---|
| Display | LCD |
| Remote Control | Yes |
| Type | Portable CD Player |
| Headphone Jack | Yes |
| Channels | Stereo |
| Playback Formats | CD Audio |
| Features | Programmable Memory |
| Power Source | AC or Battery |
| Power Requirements | AC 120V/60Hz |
Warnings and cautions regarding electrical shock, moisture, and cabinet servicing.
Safety points on operation, water exposure, ventilation, power sources, and cord protection.
Safety advice on servicing, replacement parts, damage requiring service, and troubleshooting.
Precautions for laser exposure, handling, placement, and condensation.
FCC compliance information and recommendations to protect furniture from rubber feet.
Identifies all external controls, jacks, indicators, and the LED display.
Instructions for battery installation, warnings, and AC power connection.
Steps for tuning radio stations and tips for optimal reception.
Instructions for playing CDs, managing tracks, and programming playback sequences.
Detailed steps on how to program desired tracks for sequential playback.
Procedures for storing programmed tracks and verifying the sequence.
Instructions for operating the cassette player, including playback, recording, and automatic stop.
Advice on using quality tapes and cleaning the cassette mechanism.
Methods for removing slack from cassette tape and cleaning playback heads.
How to connect and use external audio sources via the AUX IN jack.
Instructions for using headphones and their effect on speakers.
Crucial warnings regarding high volume, hearing protection, and safe listening.
Guidelines for cleaning the unit and protecting it from environmental factors.
A guide to identify and fix problems with radio, CD, and cassette functions.
Information on returning the unit for service and customer support contact details.
To Next Page
