9
Remote Sensor
Infrared receiver (17) is located on the front panel to receive infrared signal emitted by the
remote control.
Speaker Output
The three speaker output buttons (A SPEAKERS (19), B SPEAKERS (21) and C SPEAKERS
(23)) control speaker output from the radio. A SPEAKER (19) also controls the output of the rear
line level audio out. Press any of the three buttons to turn the corresponding speaker sets on or
off. SPK A, SPK B or SPK C will appear on the display.
Reset
The reset button should be activated for the following reasons:
Initial installation of the unit when all wiring is completed
Function buttons do not operate
Error symbol on the display
Use a ball point pen or thin metal object to press the reset button (4).
To Next Page
Loading...
