37
VM9216BT
Switching to Radio Tuner Source
• Touch the top left corner of the screen (the radio box) to view the SOURCE
MENU. Touch “Radio”.
• Press the SRC button on the front panel to switch to the AM/FM or RADIO
source.
Selecting FM/AM Band
Touch the Band icon on the screen to change between the following bands: FM1,
FM2, FM3, AM1, and AM2.
NOTE: The BAND button on the front panel of the unit only works when the TFT is
closed.
Seek Tuning
To seek the next higher station, touch the button.
To seek the next lower station, touch the button.
Manual Tuning
To increase or decrease the tuning frequency one step, touch the or button.
Direct Tuning
To enter a radio station directly:
1. Touch the Direct Entry icon to display the DIRECT ENTRY MENU.
2. Enter the desired radio station frequency using the on-screen number pad.
If you wish to delete an entry number touch the icon. Press OK to tune
to the selected station and touch the OK button. To exit the screen without
changing the station, touch X.
To Next Page
Loading...
