How to fix prolonged image on Jensen Car Receiver?
If you are experiencing a prolonged image or improper height/width ratio display on your Jensen Car Receiver, the aspect ratio setup may be incorrect. Use the correct aspect ratio setting.
Why is there no sound coming from my Jensen VM9414?
If you're experiencing no or low audio output from your Jensen Car Receiver, several factors could be the cause. Check the wiring for improper audio output connections and correct them if necessary. Ensure the volume isn't set too low by increasing the volume level. Review the wiring diagram to check the “MUTE” connection. Damaged speakers can also cause this issue, so consider replacing them. Heavily biased volume balance can lead to low output, adjust the channel balance to the center position. Finally, ensure speaker wiring is not in contact with any metal part of the car by insulating all speaker wiring connections.
What to do if my Jensen VM9414 Car Receiver disc does not play back?
If your Jensen Car Receiver is not playing discs, consider these possible causes: The disc may be warped or scratched, so use a disc in good condition. If the disc is dirty or wet, clean it with a soft cloth. The laser pickup might be dirty, requiring cleaning with a cleaning disc. Ensure you are using a compatible disc and that the disc region code is compatible with the unit. If the disc rating exceeds the Parental Lock rating limit, change the Parental Lock settings to a lower restriction. Lastly, make sure the disc is inserted with the label side up.
Why does my Jensen Car Receiver have poor sound quality?
Poor sound quality or distortion in your Jensen Car Receiver could be due to several reasons. Using a pirated disc can cause this, so use an original copy. Ensure that the speaker power rating is compatible with the unit, and connect proper speakers if necessary. Also, check the speaker contact for any shorts.
How to improve weak station searching on my Jensen VM9414 Car Receiver?
To improve weak station searching on your Jensen Car Receiver, make sure the auto antenna is fully extended and properly connected by checking and correcting the auto antenna control cable connection. Also, ensure that the LOCAL function is turned off.
Why is there no image on my Jensen VM9414 Car Receiver screen?
If there is no image on your Jensen Car Receiver screen, check the wiring and correct any incorrect connections to the parking brake wire. Also, ensure that the parking brake is engaged by stopping the vehicle in a safe place and applying the parking brake.
What to do if Jensen Car Receiver monitor stops at incorrect position?
If the monitor on your Jensen Car Receiver stops at an incorrect position, the moving path may be blocked. Press the OPEN key to restart monitor movement.
Why can't I insert a disc into my Jensen VM9414?
If you cannot insert a disc into your Jensen Car Receiver, it may be because there is already a disc inside the unit. Eject the current disc and then insert the new one.
How do I fix a Jensen VM9414 Car Receiver monitor that won't open automatically?
If the monitor on your Jensen Car Receiver does not open automatically, the TFT Auto Open feature may be turned off. Turn TFT Auto Open on.
What does bad disc mean on my Jensen VM9414 Car Receiver?
If your Jensen Car Receiver displays 'Bad Disc', it could mean the disc is dirty. Clean the disc with a soft cloth. Alternatively, the disc might be upside down, so insert the disc with the label side up.
General| Display Size | 6.2 inches |
|---|---|
| Touchscreen | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| Radio Tuner | AM/FM |
| DVD Player | Yes |
| Navigation | No |
| CD Player | Yes |
| Aux Input | Yes |
| Rear View Camera Input | Yes |
| Video Output | Yes |
| Max Power Output | 200 watts |
| Display Resolution | 800 x 480 |
| Video Playback | Yes |
| Peak Output | 50 watts x 4 channels |
To Next Page
