Jensen VM9216BT - Making an Outgoing Call

71
VM9216BT
Making an Outgoing Call
Outgoing calls can be performed by touching the Direct Entry icon and using the
unit’s touch screen keypad.
Direct Dialing
1. Touch the Direct Entry icon and the following screen will appear:
2. Using the keypad, touch 0-9,* or # to enter the phone number you wish
to dial. If you enter an incorrect number touch the icon to delete the
incorrect number.
3. Once the correct number appears on the screen touch the icon. To exit the
direct entry screen touch the X.
4. To end the call touch the icon on the previous screen.