83
VM9216BT
REAR CAMERA OPERATION
(if equipped)
This unit is “camera ready.” Before accessing any camera features, you must install a
rear video camera.
When the camera is not installed and the function is accessed by the gear
selector being placed in reverse or by the unit’s menu, the message “VIDEO NOT
DETECTED” will appear, indicating the function is not available.
When the camera is installed, the rear view image of what is behind the vehicle
will appear when the vehicle is placed in reverse gear. When leaving reverse gear,
the unit displays the previous screen.
The rear camera image can be adjusted from Normal to Mirror using the “Setup”
menu (“see Hardware Sub-menu Features”).*
To Next Page
Loading...
