VM9224BT
Touch the RADIO, DISC, USB1, USB2,
SO,
BT,
NAV,
AUX or CAMERA button
to select the corresponding source.
NOTE:
If
an
iPocP
is
attached to a USB1 port, IIIPOD" appears instead
of
the text IIUSB1."
External Devices
External peripheral devices, including a game console, camcorder, navigation
unit, iPod,
lune,
etc. can be connected to this unit via RCA output using
an
AN
Media Adapter Cable (not included).
o
MUTE
RighI Audio
())~
.,
V
INPUT
~:~:
II
I
C\j
0 VM.22
...
'
Video
Ql=J
vv~~=="=='=====================
~
3.5mm
AN
Cable
(nollnc:luded)
Connect the external device to the
AN
Media Adapter Cable and then plug the
cable into the
AN
INPUT connector (9) on the front
of
the radio. Select "AUX"
or "AUX IN" (when monitor
is
closed) mode to access auxiliary devices.
You
cannot directly control external devices connected to the
AN
INPUT. For
information regarding the use of USB devices, see "Inserting a USB Device
or
SO
Card" on page
31.
Volume
Adjustment
Volume Increase/Decrease
To
increase
or
decrease the volume level, turn the rotary encoder (7). When
the volume level reaches "0" or "40", a beep sounds, indicating that the
adjustment limit has been reached. The TFT screen displays the volume level
for 3 seconds.
Programmable Turn-On Volume
This feature allows the user to select a turn-on volume setting regardless of
the volume setting prior to turning the unit off.
To
program a specific turn-on volume level, turn the rotary encoder (7) to
adjust the volume to the desired turn-on level.
Push and hold the rotary
encoder while the speaker icon and level indication is displayed on the screen.
The unit will beep to confirm your turn-on volume setting.
7
To Next Page
Loading...
Need help?
General
