VM9224BT
iPod
e
OPERATION
NOTE: Be sure
your
iPod
has the latest Apple firmware installed to
avoid
connectivity issues.
Accessing iPod
Mode
This unit is Made for iPod® and iPhone®.
You
can control your iPod via touch
screen to access Playlist, Artist, Album, Songs, etc. Supported models
include, but are not limited to, the following:
• iPhone 4
• iPod nano 5G
• iPod touch 3G
• iPod classic
Accessing iPod
Mode
The unit will automatically switch to iPod mode when an iPod
or
iPhone
is
plugged into the front
or
rear USB connector.
NOTE:
For
basic
iPod
connectivity,
you
can use the white 3D-pin to USB
iPod
cable that came with
your
Apple
device.
For
iPod
video
or
photo
playback,
you
must
purchase
the jLink-USB cable.
To
return to the iPod menu from any other source menu, press the SRC button
(4)
on
the front panel until the iPod menu appears on the screen,
or
choose the
iPod1 or iPod2 icon from the "SOURCE MENU" (only available when an iPod
or iPhone
is
connected to the USB1 or USB2 connector).
34
To Next Page
Loading...
Need help?
General
