VM9224BT
OPERATING
INSTRUCTIONS
Power
On /
Off
Press the 0/SRC button (4) to turn the unit on. The buttons on the front
of
the
unit light up and the current mode status appears
on
the LCD (7).
Press and hold the
0 button to power
off
the unit.
Audible
Beep
Confirmation
An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute/Line
Mute
Press the rotary encoder button (7) to mute the volume from the unit. Press the
rotary encoder button again to restore the volume. "MUTE" is displayed
on
the
LCD. Adjusting the volume or using any
of
the audio setup features cancels
the mute function.
If the "MUTE" wire is connected, audio output mutes when a telephone call is
received by the car phone or when verbal navigation is performed (using
optional NAV102).
Playing Source Selection
When the monitor is closed, press the SRC button (4) to change between
available audio playing sources
in
the following order: RADIO, DISC, USB
1,
USB2,
SO,
BT,
NAV,
AUX and CAMERA.
Source Menu
You can also use the touch screen to change the source through the SOURCE
MENU.
To
access the SOURCE MENU, touch the top left corner
of
the screen
or
press the SRC button (4).
RADIO
SOURCE
MENU
0
@
tf
tf
~
RADIO
DISC
USB1
USB2
SO
*
EB
~~
~
BT
NAV
AUX
CAMERA
6
To Next Page
Loading...
Need help?
General
