VM9224BT
16. 1/2: Touch to view a second screen of menu choices
17. Touch to view the SOURCE MENU and select a
new
playback source
18.
MEM: View screen used to enter current channel into preset memory
19.
0:
Touch to view the SETUP menu
20. PS (Preview Scan): Touch to scan all stations available, stopping for 5
seconds at each and continuing until a station is selected
21. PTY Indicator
22. RDS Indicator
23. AS: Touch to automatically store stations
24. PTY: Touch to activate the PTY function
25.
LOC: Touch to activate/deactivate the Local function
Switching
to
Radio
Tuner
Source
• Touch the top left corner
of
the screen (the RADIO circle) to view the
SOURCE MENU. Touch "Radio".
• Press the SRC button (4) on the front panel to switch to the AM/FM or
RADIO source.
Selecting
FM/
AM
Band
Touch the BAND button (15) on the screen to change between the following
bands: FM1, FM2, FM3, AM1, and AM2.
NOTE: The BAND
button
on the
unit
only
works when the TFT
is
closed.
Seek
Tuning
To
seek the next higher station, touch the
~~I
button.
To
seek the next lower station, touch the I
......
button.
Manual
Tuning
To
increase or decrease the tuning frequency one step, touch the
~~
or
......
button.
18
To Next Page
Loading...
Need help?
General
