Jensen VM9224BT - Page 47

VM9224BT
Bluetooth Setup
Auto Answer
You can choose to have the VM9224BT automatically answer incoming calls
to your paired Bluetooth phone.
To turn "Auto answer" on:
1. Touch the 0 button to view the SETUP menu.
2. Select the "Bluetooth" sub-menu.
3. Touch the area to the right of "Auto answer" to select "Auto".
Auto Connect
The auto Connect option will allow the VM9224BT to automatically connect to
your previously paired Bluetooth when it
is in range. When the Connect option
is set to "Manual", you must touch the
~ button to re-establish a connection
with your phone.
To turn auto "Connect" on:
1. Touch the 0 button to view the SETUP menu.
2. Select the "Bluetooth" sub-menu.
3. Touch the area to the right of "Connect" to select "Auto".
Advanced Audio Distribution Profile (A2DP)
The VM9224BT allows you to play back audio files from your phone, PDA or
personal music player using a Bluetooth connection.
Before using
an audio player, it may be necessary to enter a PI N code into the
unit. Enter the PIN code referring to "Bluetooth Sub-menu Features" on
page
14.
NOTE: Please quit A2DP mode before attempting to make a phone call,
as unexpected results may occur depending on your mobile phone
model.
The VM9224BT can control a Bluetooth audio player via Advanced Audio
Distribution Profile (A2DP) or AudioNideo Remote Control Profile (AVRCP).
Bluetooth audio players (or Bluetooth adapters) compatible with these profiles
can be connected to this unit. Functionality varies depending on the profile
used.
44