5-376-000086
REV. 4 - 07/10
© 2010 Jerr-Dan Corporation. All Rights Reserved.
FOREWORD
This manual is intended to serve as a guide to the owner and operator in the
safe operation and optimum performance of this Jerr-Dan equipment.
Establishment of good operating habits and familiarity with the equipment
and its capabilities combined with good judgement are essential.
Before attempting to operate the unit carefully read all sections of this manual.
This manual is intended to serve as a guide to the owner and operator in the
safe operation and optimum performance of this Jerr-Dan equipment.
This manual should be kept with the equipment at all times and referred to
whenever in doubt of proper operation.
Information contained in this manual reflects how this vehicle was built at the
factory. Modifications or additions by the distributor or owner are not re-
flected in this manual.
This manual does not include operation and maintenance information for the
commercial chassis (IHC, Ford, GM, etc.). This information is provided by
the chassis manufacturer.
When inquiring about operation, maintenance or warranty, please refer to
your equipment’s Sales Order Number, Serial Number and Model Number.
This information can be found on the aluminum tag riveted inside the driver’s
side toolbox on the back wall in the upper right corner.
001
To Next Page
Loading...
Need help?
General