EasyManuals Logo

Jet GH-20 ZH Series User Manual

Jet GH-20 ZH Series
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
31. Workpieces longer than 3 times the chucking
diameter must be supported by the tailstock or a
steady rest.
32. Avoid small chuck diameters with large turning
diameters.
33. Avoid short chucking lengths and small
chucking contact.
34. Turn off the machine and disconnect from power
before cleaning. Use a brush to remove
shavings or debris — do not use your hands.
35. Do not stand on the machine. Serious injury
could occur if the machine tips over.
36. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until moving parts come to a complete
stop.
37. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
38. Do not operate the lathe in flammable or
explosive environments. Do not use in a damp
environment or expose to rain.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly even
death.
WARNING: Some dust, fumes and gases
created by power sanding, sawing, grinding,
drilling, welding and other construction activities
contain chemicals known to the State of California
to cause cancer and birth defects or other
reproductive harm. Some examples of these
chemicals are:
lead from lead based paint
crystalline silica from bricks, cement and other
masonry products
arsenic and chromium from chemically treated
lumber
Your risk of exposure varies, depending on how
often you do this type of work. To reduce your
exposure to these chemicals, work in a well-
ventilated area and work with approved safety
equipment, such as dust masks that are
specifically designed to filter out microscopic
particles. For more information go to
http://www.p65warnings.ca.gov/ and http://www.
p65warnings.ca.gov/wood.
WARNING: This product can expose you to
chemicals including lead and cadmium which
are known to the State of California to cause
cancer, and phthalates which are known to the
State of California to cause birth defects or other
reproductive harm. For more information go to
http://www.p65warnings. ca.gov.

Table of Contents

Other manuals for Jet GH-20 ZH Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jet GH-20 ZH Series and is the answer not in the manual?

Jet GH-20 ZH Series Specifications

General IconGeneral
BrandJet
ModelGH-20 ZH Series
CategoryLathe
LanguageEnglish

Related product manuals