Jet JBOS-5 User Manual

Operating Instructions and Parts Manual
Benchtop Oscillating Spindle Sander
Model JBOS-5
For models with serial no. 11095097 and higher
WALTER MEIER (Manufacturing) Inc.
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-708404
Ph.: 800-274-6848 Revision C1 06/2013
www.waltermeier.com Copyright © 2013 Walter Meier (Manufacturing) Inc.

Jet JBOS-5 Specifications

General

Brand	Jet
Model	JBOS-5
Category	Sander
Language	English

Summary

Warranty and Service

Warranty Coverage Details

Defines what is covered, who is covered, period, and exclusions for JET products.

Service Procedures and Limitations

Outlines how to obtain service and states limitations on implied or consequential damages.

Safety Warnings

General Safety Precautions

Comprehensive list of 23 safety rules for operating the sander, including PPE and work area safety.

Introduction

Product Specifications

Unpacking and Setup

Contents of Shipping Container

Lists all items included in the product's packaging for verification upon receipt.

Spindle and Insert Storage Plates

Instructions for organizing and storing spindles and insert plates.

Installing Spindles

Step-by-step guide for correctly threading and tightening the spindle onto the sander.

Insert Plates

Setup for 90 Degrees

Setup for Bevel Sanding

Dust Collection Setup

Turning the Sander On & Off

Removing Spindles

Changing Sanding Sleeves

Insert Plate Diameters

Optional Accessories

Replacement Parts Information

Table Assembly Diagram

Base and Motor Assembly Diagram

Parts List for the JBOS-5