Jet JWBS-16X - Machine Description; 4 Machine Specifications; Remaining Hazards; Technical Data

3.3 Remaining hazards
When using the machine according to regulations some
remaining hazards may still exist
The moving sawblade in the work area can cause injury.
Broken saw blades can cause injuries.
Thrown workpieces can lead to injury
Wood chips and sawdust can be health hazards. Be sure to
wear personal protection gear such as safety goggles ear-
and dust protection.
Use a suitable dust exhaust system.
The use of incorrect mains supply or a damaged power cord
can lead to injuries caused by electricity.
4. Machine specifications
4.1 Machine Description
Fig 1
A Height scale
B Blade tracking window
C Height adjust hand wheel
D Upper blade guides
E Saw blade
F Parallel cutting device
G Table pin
H Dust port
I Wheel cover
J Mitre gauge
K Fence carrier
L Fence
M On/Off magnetic switch
N Blade tension handwheel
O Wheel cover
P Wheel cover micro switch
4.2 Technical data
JWBS-16X:
Wheel diameter 420 mm
Cutting width max 405 mm
Cutting height max 250 mm
Sawblade length 3125 mm
Blade width 3 - 25 mm
Blade thickness 0,5 – 0,7 mm
Cutting speed 900 m/min
Machine Table(Lx W) 430x430 mm
Table tilting range -10° to 45°
Working height 890mm
Dust port diameter 100mm
Overall (LxWxH) 800x950x1850mm
Weight 155 kg
Mains 230V ~1/N/PE 50Hz
Motor output power 1,1 kW (1,5HP) S1
Reference current 7 A
Extension cord (H07RN-F): 3x1,5mm²
Installation fuse protection 16A
Mains 400V ~3L/PE 50Hz
Motor output power 1.5 kW (2 HP) S1
Reference current 3,5 A
Extension cord (H07RN-F): 5x1,5mm²
Installation fuse protection 16A
JWBS-18Q:
Wheel diameter 470 mm
Cutting width max 460 mm
Cutting height max 300 mm
Sawblade length 3480 mm
Blade width 3 - 30 mm
Blade thickness 0,5 – 0,7 mm
Cutting speed 550 / 970 m/min
Machine Table(Lx W) 485x485 mm
Table tilting range -10° to 45°
Working height 950mm
Dust port diameter 100mm
Overall (LxWxH) 850x1000x1900mm
Weight 180 kg
Mains 230V ~1/N/PE 50Hz
Motor output power 1,5 kW (2HP) S1
Reference current 9,5 A
Extension cord (H07RN-F): 3x1,5mm²
Installation fuse protection 16A
Mains 400V ~3/PE 50Hz
Motor output power 2,2 kW (3 HP) S1
Reference current 5 A
Extension cord (H07RN-F): 5x1,5mm²
Installation fuse protection 16A
JWBS-20Q:
Wheel diameter 520 mm
Cutting width max 508 mm
Cutting height max 300 mm
Sawblade length 3820 mm
Blade width 3 - 30 mm
Blade thickness 0,6 – 0,8 mm
Cutting speed 550 / 970 m/min