Need help?Do you have a question about the Jet JWBS-18X and is the answer not in the manual?
General| Type | Band Saw |
|---|---|
| Blade Length | 125 in |
| Motor Power | 1 3/4 HP |
| Table Size | 19 x 19 in |
| Weight | 370 lbs |
| Cutting Capacity Width | 18 inches |
| Voltage | 115/230V, Prewired 115V |
Details on product updates and contacting WMH Tool Group.
Crucial safety precautions, including symbol definitions and warnings.
Technical specifications for JWBS-18X and JWBS-18X-3 band saws.
Specific grounding procedures for 230V single-phase operation.
Lists necessary tools for setup and adjustments.
Instructions for attaching the table and rails.
Steps to assemble and align the fence.
Adjusting fence-to-table gap and rear hook positioning.
Installation and squaring of the miter gauge.
Setting the table to a precise 90-degree angle.
Setting blade tension and ensuring proper wheel tracking.
Adjusting upper and lower bearings for blade support.
Methods for compensating blade wandering.
Procedures for replacing the V-belt and aligning pulleys.
Instructions for ripping, crosscutting, and resawing.
Guidelines for choosing the correct band saw blade.
Common reasons for band saw blade breakage.
Routine cleaning and upkeep procedures for the machine.
Detailed list of parts for the upper wheel assembly.
List of components for the lower wheel and motor assembly.
Comprehensive parts list for the blade guide assembly.
Parts breakdown for table and fence components.
Wiring diagram for the 1.75HP single-phase motor.
Wiring diagram for the 3HP single-phase motor.
To Next Page
