Jet JWBS-20 Owner's Manual

4
Table of Contents
Warranty .................................................................................................................................................2
Warnings.................................................................................................................................................3
Table of Contents....................................................................................................................................4
Specifications..........................................................................................................................................4
Contents of Shipping Container ...............................................................................................................5
Unpacking and Setup...............................................................................................................................5
Tools Included for Assembly....................................................................................................................5
Tools Required for Assembly and Adjustments........................................................................................5
Upper Bearing Guide Adjustment.............................................................................................................6
Lower Bearing Guide Adjustment.............................................................................................................7
Mounting the Table..................................................................................................................................7
Adjusting 90 Degree Table Stop ..............................................................................................................8
Rail Assembly..........................................................................................................................................8
Fence Assembly and Adjustment.............................................................................................................9
Resaw Guide.........................................................................................................................................10
Miter Gauge...........................................................................................................................................10
Tilting the Table.....................................................................................................................................10
Height Scale Adjustment .......................................................................................................................10
Changing Blades ...................................................................................................................................11
Adjusting Blade Tension........................................................................................................................12
Adjusting Blade Tracking.......................................................................................................................12
Brake Pedal...........................................................................................................................................13
Replacing Belt .......................................................................................................................................13
Adjusting Belt Tension...........................................................................................................................13
Electrical Connections...........................................................................................................................14
Maintenance..........................................................................................................................................14
Troubleshooting.....................................................................................................................................15
Part’s Breakdowns and Part’s List.....................................................................................................16-25
Electrical Schematics ............................................................................................................................26
Specifications: JWBS-20
Stock Number................................................................................................................................ 708752
Cutting Capacity (HxW).........................................................................................................12-1/2” x 20”
Maximum Rip Left of Blade w/Fence ..............................................................................................18-1/4”
Maximum Rip Right of Blade w/Fence..............................................................................................9-3/4”
Blade Length ......................................................................................................................................150”
Minimum Blade Width .........................................................................................................................1/8”
Maximum Blade Width .....................................................................................................................1-1/2”
Table Size ...................................................................................................................................21” x 21”
Table Tilt ...............................................................................................................................45°Rto10°L
Table Height...................................................................................................................................36-1/8”
Front Table to Center of Blade..............................................................................................................11”
Wheel Diameter .............................................................................................................................20-1/2”
Blade Speed.......................................................................................................................... 3,450 SFPM
Dust Chute Diameter ..............................................................................................................................4”
Overall Dimensions (HxWxD)...........................................................................75-1/4” x 41-1/4” x 34-1/2”
Motor (TEFC) ............................................................................................................................2 HP, 1Ph
................................................................................................................................................. 230V only
Net Weight (approx.) .....................................................................................................................500 lbs.
Shipping Weight (approx.) .............................................................................................................564 lbs.
The specifications in this manual are given as general information and are not binding. JET Equipment
and Tools reserves the right to effect, at any time and without prior notice, changes or alterations to
parts, fittings, and accessory equipment deemed necessary for any reason whatsoever.

Jet JWBS-20 Specifications

General

Brand	Jet
Model	JWBS-20
Category	Saw
Language	English