Jet JWBS-20 Operating Instructions

56 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

JWBS-15

JWBS-18

JWBS-20

WOOD BAND SAW

Original:

GB

Operating Instructions

Translations:

D

Gebrauchsanleitung

F

Mode d´emploi

JPW (Tool) AG

Tämperlistrasse 5

CH-8117 Fällanden

Switzerland

Phone +41 44 806 47 48

Fax +41 44 806 47 58

www.jettools.com

M- 714600M, 714650T, 714700M, 714750T, 714800M, 714850T 2016-12

Table of Contents

Other manuals for Jet JWBS-20

Operating Instructions And Parts Manual32 pages

Owner's Manual26 pages

Questions and Answers:

A
Andrew OrtegaJul 25, 2025
What to do if my Jet JWBS-20 stops or will not start?
- J
  Jennifer ThomasJul 26, 2025
  If your Jet Saw stops or won't start, here are a few things to check: * The overload may have tripped. If so, allow the motor to cool, then reset it by pushing the off switch. * Make sure the saw is properly plugged in by checking the plug connections. * A fuse may have blown or a circuit breaker tripped. Replace the fuse or reset the circuit breaker. * The cord may be damaged and need to be replaced.
T
tjoyceAug 1, 2025
Why does my Jet Saw makes unsatisfactory cuts?
- A
  Audrey EdwardsAug 1, 2025
  If your Jet Saw makes unsatisfactory cuts, consider the following: * The blade may be dull and needs replacing. * The blade may be mounted incorrectly; ensure the teeth point down. * There might be gum or pitch on the blade. Remove the blade and clean it. * You may be using the incorrect blade for the cut; change to the correct type. * There might be gum or pitch on the table. Clean the table.
M
Mark CallahanAug 6, 2025
What to do if the blade wanders during cut on my Jet JWBS-20 Saw?
- R
  racheljacksonAug 6, 2025
  If your Jet Saw blade wanders during a cut, it could be due to: * The fence not being aligned with the blade. Check and adjust the fence. * Warped wood. Select another piece of wood. * Excessive feed rate. Reduce the feed rate. * Using the incorrect blade for the cut. Change the blade to the correct type.

Jet JWBS-20 Specifications

General

Brand	Jet
Model	JWBS-20
Category	Saw
Language	English

Related product manuals

Preview: Jet JWBS-18

Preview: Jet JWBS-16

Preview: Jet JWBS-14CS

Preview: Jet JWBS-140S

Preview: Jet JWBS-10OS

Preview: Jet JWBS-12OS

Preview: Jet JWBS-14SFX

Preview: Jet JWB-10

Preview: Jet JWTS-10

Preview: Jet JWSS-18B

Preview: Jet JWTS-10JF