4.2 Technical data
JWBS-15:
Wheel diameter 375 mm
Cutting width max 360 mm
Cutting height max 356 mm
Sawblade length 3380 mm (3350~3390mm)
Blade width 3 - 25 mm
Blade thickness 0,5 – 0,7 mm
Cutting speed 760 m/min
Machine Table(Lx W) 545x405 mm
Table tilting range -5° to 45°
Working height 890mm
Dust port diameter (2x) 100mm
Overall (WxDxH) 750x810x1880mm
Mains 1~230V, PE, 50Hz
Motor output power 1.1 kW (1.5HP) S1
Reference current 6 A
Extension cord (H07RN-F): 3x1,5mm²
Installation fuse protection 16A
Weight 172 kg
Mains 3~400V, PE, 50Hz
Motor output power 1.5 kW (2 HP) S1
Reference current 3.8 A
Extension cord (H07RN-F): 5x1,5mm²
Installation fuse protection 16A
Weight 174 kg
Insulation protection class I
JWBS-18:
Wheel diameter 470 mm
Cutting width max 457 mm
Cutting height max 406 mm
Sawblade length 3810 mm ( 3785~3835)
Blade width 3 - 30 mm
Blade thickness 0,6 – 0,8 mm
Cutting speed 580 & 900 m/min
Machine Table(Lx W) 690x508 mm
Table tilting range -5° to 45°
Working height 940mm
Dust port diameter (2x) 100mm
Overall (WxDxH) 915x865x2035mm
Mains 1~230V, PE, 50Hz
Motor output power 1.5 kW (2 HP) S1
Reference current 8 A
Extension cord (H07RN-F): 3x1,5mm²
Installation fuse protection 16A
Weight 214 kg
Mains 3~400V, PE, 50Hz
Motor output power 2.2 kW (3 HP) S1
Reference current 5 A
Extension cord (H07RN-F): 5x1,5mm²
Installation fuse protection 16A
Weight 217 kg
Insulation protection class I
JWBS-20:
Wheel diameter 514 mm
Cutting width max 508 mm
Cutting height max 406 mm
Sawblade length 4013 mm (3990~4035mm)
Blade width 3 - 38 mm
Blade thickness 0,6 – 0,9 mm
Cutting speed 640 & 1220 m/min
Machine Table(Lx W) 690x508 mm
Table tilting range -5° to 45°
Working height 940mm
Dust port diameter (2x) 100mm
Overall (WxDxH) 940x845x2235mm
Mains 1~230V, PE, 50Hz
Motor output power 2.2 kW (3 HP) S1
Reference current 12 A
Extension cord (H07RN-F): 3x1,5mm²
Installation fuse protection 16A
Weight 258 kg
Mains 3~400V, PE, 50Hz
Motor output power 3.7 kW (5 HP) S1
Reference current 8.8 A
Extension cord (H07RN-F): 5x1,5mm²
Installation fuse protection 16A
Weight 276 kg
Insulation protection class I
4.3 Noise emission
Determined according to EN 1807
(Inspection tolerance 4 dB)
Workpiece beech:
T=30mm, L=1500mm, moisture 8,5%
Acoustic power level (according to EN ISO 3746):
Idling LwA 82 dB(A)
Operating LwA 93 dB(A)
Acoustic pressure level (according to EN ISO 11202):
Idling LpA 74 dB(A)
Operating LpA 87 dB(A)
The specified values are emission levels and are not
necessarily to be seen as safe operating levels. Although
there is a correlation between emission and imission levels,
these do not constitute a basis for determining the necessity
of additional safety measures. Workplace conditions which
could influence the noise imission level include the duration
of resonance, spatial particulars, other noise sources etc. For
example, the number of machines and other work being
performed. The permissible workplace levels can vary from
country to country.
This information is intended to allow the user to make a
better estimation of the hazards and risks involved.
To Next Page
Loading...
Need help?
General
