Tailstock spindle taper MT 2
Tailstock hole diameter 9,5mm
Tailstock ram travel 57mm
Centre above workbench 375mm
Overall (LxWxH) 853x280x450mm
Net weight 55 kg
Mains 1~230V, PE, 50Hz
Motor power 0,73kW (1 HP)
Reference current 3,2 A
Extension cord (H07RN-F): 3x1,5mm²
Installation fuse protection 10A
Isolation class I
4.3 Noise emission
Acoustic pressure level
(EN ISO 11202):
Idling LpA 67,4 dB(A)
In operation LpA 76,5 dB(A)
The specified values are emission levels and are not
necessarily to be seen as safe operating levels.
As workplace conditions vary, this information is intended to
allow the user to make a better estimation of the hazards and
risks involved only.
4.4 Content of delivery
Live centre
Spur centre
tooling knockout bar
Tool caddies / Cord wrap
150 mm tool rest
250 mm tool rest
75 mm face plate
Operating tools
Operating manual
Spare parts list.
Fig 3
5. Transport and start up
5.1 Transport and installation
The machine is designed to operate in closed rooms and
must be placed stable on firm and levelled surface.
For safety reasons, the machine must be bolted to the work
bench or to the optional stand.
Fig 4
For packing reasons the machine is not completely
assembled
5.2 Assembly
If you notice transport damage while unpacking, notify your
supplier immediately. Do not operate the machine!
To Next Page
Loading...
