Jet JWL-1642EVS - Manual Introduction and Overview

7
Specifications JWL-1642EVS
Stock Number................................................................................................................................ 708359
Over Bed..............................................................................................................................................16"
Swing Over Tool Rest Base..................................................................................................................12"
Distance Between Centers....................................................................................................................42"
Speeds (RPM).................................................................................................................0-1200 & 0-3200
Spindle Nose.....................................................................................................................1-1/4" x 8 T.P.I.
Drive Spindle Through Hole.................................................................................................................3/8"
Tailstock Spindle Through Hole............................................................................................................3/8”
Tailstock Spindle Travel..........................................................................................................................4”
Tool Rest..............................................................................................................................................14”
Face Plate..............................................................................................................................................6”
Headstock Taper ...............................................................................................................................MT-2
Tailstock Taper..................................................................................................................................MT-2
Spindle Center to Floor (approx.)....................................................................................................44-1/2”
Motor.........................................................................................................................1-1/2 HP, 3Ph, 230V
............................................................................................................................Input Power 115V Only
Net Weight (approx.).....................................................................................................................440 Lbs.
Shipping Weight (approx.).............................................................................................................475 Lbs.
The specifications in this manual are given as general information and are not binding. WMH Tool Group
reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings,
and accessory equipment deemed necessary for any reason whatsoever.