EasyManuals Logo

Jet JWS Series User Manual

Jet JWS Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
32. The fiberglass handle has been tested and
meets certain insulating properties of a “hot
stick”. However, the web strap on this hoist is
not a rated insulating member. The web strap,
when clean and dry, may have dielectric
properties typical of polyester or nylon fibers.
Use appropriate insulating members in series
with this hoist to achieve proper working
distances per OSHA Regulation Subpart V,
1926.950 (see Table 1) or follow your
company’s safe work practices. If handle
swings closer to energized conductors than
OSHA working distances or company practices
permit, use appropriate rubber gloves rated for
the voltage.
1.1 Alternating Current – Minimum Distances
(OSHA Regulation Subpart V, 1926.950 Table V-1)
Voltage range
(phase to phase)
Kilovolt
Minimum
Working & Clear
Hot Stick
Distance
Voltage range
(phase to phase)
Kilovolt
Minimum
Working & Clear
Hot Stick
Distance
2.1 to 15 2 ft. 0 in. 161 to 169 3 ft. 8 in.
15.1 to 35 2 ft. 4 in. 230 to 242 5 ft. 0 in.
35.1 to 46 2 ft. 6 in. 345 to 362 7 ft. 0 in.
46.1 to 72.5 3 ft. 0 in. 500 to 552 11 ft. 0 in.
72.6 to 121 3 ft. 4 in. 700 to 765 15 ft. 0 in.
138 to 145 3 ft. 6 in.
Table 1
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible tool damage.
This means that if precautions are not heeded, it may result in serious, or possibly even
fatal, injury.
SAVE THESE INSTRUCTIONS
2.0 About this manual
This manual is provided by JET, covering the safe operation and maintenance procedures for a JET JWS-series
Web Strap Ratchet Hoist. This manual contains instructions on safety precautions, general operating procedures,
maintenance instructions and parts breakdown. This tool has been designed and constructed to provide
consistent, long-term operation if used in accordance with the instructions set forth in this document.
The web strap hoists are proof-tested and comply with OSHA, ANSI/ASME B30.21 Lever Hoists and
B30.10 Hooks standards.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our
web site: www.jettools.com.
Retain this manual for future reference. If the hoist transfers ownership, the manual should accompany it.
Read and understand the entire contents of this manual before attempting setup or
operation! Failure to comply may cause serious injury!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jet JWS Series and is the answer not in the manual?

Jet JWS Series Specifications

General IconGeneral
BrandJet
ModelJWS Series
CategoryChain Hoists
LanguageEnglish

Related product manuals