Jetco Torque Tools ED SERIES - Introduction to Jetco Electronic Torque Wrenches

INTRODUCTION
1Jetco Torque Tools
Congratulations! You have purchased the most accurate, durable and easy to use electronic torque
wrench on the market. You will find this torque wrench can compete with other products costing 4
times as much. This wrench was made to be used as a tool and not as a high cost, fragile display
that only a quality control person could figure out. Turn it on and apply the torque. It’s that easy!
A significant advantage this wrench has over other more expensive wrenches is that it samples
torque fast enough so you do not need to pull slowly on the wrench. Other wrenches will not capture
the actual peak torque when you pull on the wrench at normal speeds. Simply put, this wrench is a
“Hot Rod”. It samples torque at a blazing rate of over 2,500 samples per second compared to as low
as 250 per second from the competition.
Did you know with conventional mechanical torque wrenches (clickers) you can easily over torque
the fastener by as much as 100%! This is because even though the wrench may have “clicked” at the
target torque setting the user probably did not stop pushing on the wrench until much higher torque
was achieved. There is no way of knowing what the user actually torqued the fastener to.
With this new torque wrench, not only will you see exactly what torque you applied, you will be shown
a red light and buzzer if you over torque the fastener. This results in more accurate torquing and less
problems with broken bolts, warped heads, warped brake rotors etc..
Choose the power option and you have a wrench that will output data to a computer and has internal
rechargeable batteries.
For additional features, visit our website at www.itorque.com.
Thank you for choosing Jetco Torque Tools!
www.itorque.com