SAFETY WARNINGS
Jetco Torque Tools 2 www.itorque.com
Before operating this tool, please read and follow all safety precautions
found in this owner's manual. Improper and unsafe use of this tool can
result in serious bodily injury! Please keep this manual available for
future reference.
Always wear safety glasses when operating any torque tool.
Always use the proper range torque wrench for the application. Over torque may result in damage
or failure of the tool which can result in personal injury. Under torque may result in
an incorrectly tightened fastener that could loosen resulting in failure at a later date.
Do not use tools for jobs which they are not intended for. Never use a torque wrench to loosen a
bolt/screw.
Never apply torque in a situation where tool breakage may result in a fall or slip resulting in
personal injury. Pulling on the wrench as opposed to pushing may help in this situation.
Always replace worn or rounded fasteners prior to applying torque. Slippage may occur resulting in
personal injury.
Examine each tool for damage prior to use and never use if damaged.
When not in use, the tool should be stored in a dry place.
Keep handles dry, clean, and free from oil and grease to prevent slippage.
While the information in this document has been presented with all due care, Jetco Torque Tools LLC does not warrant or
represent that the information is free from errors or omission. This information is made available on the understanding that
Jetco Torque Tools LLC shall have no liability to the user for any loss, damage, cost or expense incurred or arising by any
person using or relying on the information and whether caused by reason of any error, negligent act, omission or
misrepresentation in the information or otherwise. Jetco Torque Tools LLC reserves the right to change information
without notice.
To Next Page
Loading...