computer radio control system
EN
the relevant amount. After payment, a unique nontransferable file
named “Activation.bin” will be generated. It will then be sent to
your e-mail.
6. Connect the DS-14 to your computer and enable USB mode.
7. Copy the “Activation.bin” file to the transmitter SD card into the
root folder. The contents of the transmitter SD card can then look like
this:
8. Disconnect the transmitter from the computer (Do not forget to
confirm the safe hardware removal). Then confirm in your
transmitter that you want to update and restart it.
If the activation is successful, an informative table with a list of
modules appears immediately after switching on. Then it is
possible to operate the transmitter as usual.
10
To Next Page
Loading...
Need help?
General
