computer radio control system
EN
integrated cover in the DS-12 case for protection against mechanical
damage.
Large Memory – Internal SD card for storing models, sounds, and
telemetry data.
USB Connector – convenient connection to your PC. Fast firmware &
sound upgrades, telemetry data downloads.
Fast Navigation – 3D wheel-style interface combined with function
keys allow for speedy navigation within the DS-12 menu.
Digital Trims – fully programmable trims and a revolutionary
automatic trimming function.
Swappable and Assignable Switches – all of the switches on the DS-
12 transmitters (2 or 3-position) can be easily moved and assigned to
create a custom configuration that works best for your application.
Programming – the logical and intuitive transmitter firmware is
designed to be simple to use. Just follow the step-by-step screens.
The creation of a new model can be accomplished with just a few
easy steps.
Sounds/Alarms – the DS -12 transmitters are equipped with audible
alarms and also allows the use of user-recordable alarms and sounds
to keep you fully informed while also keeping distractions to a
minimum.
Integrated microphone with voice recognition capability - using
the integrated microphone you can easily prepare your own audio
files. Furthermore, you can teach the transmitter to respond to
several voice commands.
Duplex 2.4GHz – the DS-12 transmitters feature the Duplex 2.4GHz,
frequency hopping, digital, data stream system, originally
developed by JETI model in the Czech Republic. This system has
been reliably used for many years.
Duplex 900MHz NG (Next Generation) - the DS-12 transmitters
feature a backup wireless system for unmatched data transmission
safety and reliability.
Built-in Telemetry – from the start, the DS-12 transmitters were
designed and built with many attractive features and include the full
integration of all Duplex telemetry sensors.
Transmitters - the DS-12 designs use premium quality materials and
emphasize state-of-the-art appearance and user comfort.
Precise Gimbals – the transmitter gimbals are equipped with Hall
sensors and ball bearings for precision movement with an almost
unlimited lifespan.
Haptic feedback - the transmitter are equipped with shaking
vibration motor that can be used for alarm notifications, timers etc.
LCD Display – color 3.5" TFT LCD display with 320 x 240 resolution
which is highly visable under any light conditions.
Li-Ion Battery – provides a proven and reliable energy source with a
high capacity (6200mAh) and a long service life.
Easy Charging – simply connect the wall power supply, optional car
charger, or any 12V DC power supply to the transmitters charge port.
The DS-12 may also be charged through the USB to PC interface. The
charging progress is shown on the DS-12 display.
Integrated Antenna – the antennas are located behind fully
1.3 Features
11
To Next Page
Loading...
Need help?
General
