JetLegend T-45 Goshawk User Manual

JetLegend T-45 Goshawk
Page 19 of 24
74 Secure a 36" extension to the stab servo,
tape it for security. Reinstall the stab
mechanism into the fuselage using the six
bolts. Install the stabs and tighten them
securely using the four provided holes for the
wrench.
RUDDER
75 Locate a miniservo for the rudder on the
rudder servo door and mark and cut the
opening for the servo horn.
76 Install the servo on the door using suitable
mounts; a flat-mount servo is handy here.
77 Mark the rudder horn line, it should be in
line with the axis of the servo horn, not in line
with the direction of flight. Install the horn
and linkage the same way as the other
surfaces. Connect a 36" extension to the
rudder servo lead and install the rudder
assembly to the fuselage, tightening the
provided bolts securely through the holes
provided at the factory.
77A. Rudder linkage. Don't forget to tighten
the rudder mounting bolt on the fuselage.
FUEL TANK
78 Heat up the brass tubes with a torch; then
let them cool slowly for ten minutes. This will

JetLegend T-45 Goshawk Specifications

General

Brand	JetLegend
Model	T-45 Goshawk
Category	Toy
Language	English