EasyManuals Logo

Jetmaster MK6 Installation And Operating Instructions For Manual And Remote Control Options

Jetmaster MK6
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
b) The complete installation including the meter must be tested for soundness and purged as
described in the above code. The gas connection is nut and olive suitable for 8mm pipe. The
connection can be made from left, right or the rear.
c) A means of isolating the fire must be fitted upstream of the appliance to allow servicing etc to be
carried out. (If concealed fixing is required refer to the ‘Gas connection’ section in the ‘Installation
instructions’).
d) The gas supply must be made with rigid or semi-rigid pipe.
Unpacking
When unpacking refer to the check list below to ensure that all components are present before
commencing installation.
Do not unwrap the front or the coal beds until required to avoid accidental damage.
x Burner Tray
x Fire front :- Either Regency Black Front or Open Black Front. (See Fig. 3).
x Ash pan cover
x Coal beds comprising:
- Rear coal bed
- Front coal bed
- Left hand side coal support
- Right hand side coal support
x Poly Bag containing:
- Installation & Operating Instructions.
- 3 - Woodscrews
- 3 - Rawlplugs
x Remote Control Version Only
- Remote Handset
- Battery PP3, 9 volts sealed long life Alkaline
- Battery Pack 2xD, 7.2 volts sealed long life Lithium
- Double sided tape
- P Clip
Installation instructions
Preparing the Appliance (See Fig. 3)
Carefully remove the loose coal pack, side coal supports, front coal bed and rear coal bed.
If a concealed gas connection is to be made prepare the pipework prior to sliding the fire into the
recess. Ensure sufficient length of pipe to allow connection.
Fitting the Burner Tray.
THIS APPLIANCE MUST BE SECURELY FIXED TO THE HEARTH THROUGH THE FRONT LEGS.
Position the burner tray into the fireplace recess. Ensure pipework allows for the removal of the
burner tray.
If the gas pipe is to be brought in from the front over the hearth ensure that the pipe does not foul
the fire front or ash pan cover.
Mark the positions of the securing holes in the front legs.
- Pack of loose coals
- Fire Size
16”E 16” 18”
- Coal Quantity 17 17 19

Other manuals for Jetmaster MK6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jetmaster MK6 and is the answer not in the manual?

Jetmaster MK6 Specifications

General IconGeneral
BrandJetmaster
ModelMK6
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals