Jetmaster MYNX User Manual

INSTALLATION & OPERATING INSTRUCTIONS
1
CONTENTS
INDEX
PLEASE READ THIS CAREFULLY BEFORE STARTING WORK
INSTALLATION AND OPERATING
INSTRUCTIONS: MYNX
1) Index 1
2) Technical Data 2
3) Placement Of The Unit 2
a) Placement inside the room 2
i) Safety distances 2
ii) Hearth 3
iii) Roof / ceiling influence 3
b) Roof & Ceiling requirements 3
i) Flue length 3
ii) Flue termination point 4
iii) Ceiling penetration 5
iv) Roof Cavity 6
c) Additional accessories 7
4) How To Install 8
a) Locate the unit, and cut through the ceiling 8
b) Now fit the flue pipes. 8
c) Fixing the flue length. 10
d) Fitting the cowl. 10
e) The flue pipe must now be sealed on top of the roof. 10
f) Heat insulation. 14
g) Finishing. 14
5) Use 16
a) What wood to use 16
b) Building a fire 16
c) Using the damper (accessory) 17
6) Maintenance 19
a) Painting of exposed surfaces. 19
b) The log pan 19
7) Warrantee 20

Jetmaster MYNX Specifications

General

Brand	Jetmaster
Model	MYNX
Category	Indoor Fireplace
Language	English

Summary

Unit Placement Guidelines

Safety Distances

Specifies minimum clearance distances from walls and proximity to combustible materials for safe placement.

Hearth and Floor Protection

Details non-combustible surface requirements and minimum hearth dimensions for safe installation.

Roof and Ceiling Installation Specs

Covers flue length, termination, ceiling penetration, roof cavity, and accessory requirements.

Installation Procedure

Unit Location and Ceiling Cut

Procedure for positioning the unit and cutting the ceiling opening for the flue pipe.

Flue Pipe Assembly and Fixing

Instructions for fitting, connecting, securing flue pipes, and attaching the cowl.

Roof Sealing and Flashing

Steps for sealing the flue pipe on the roof using flashing and waterproofing for leak prevention.

Heat Insulation and Finishing

Recommendations for insulating the flue and fitting the escutcheon plate for a neat finish.

Fireplace Usage

Wood Selection and Preparation

Guidance on choosing seasoned wood for efficient burning and maximizing heat output.

Fire Starting and Maintenance

Step-by-step instructions for starting and maintaining a fire in the fireplace.

Damper Operation

Operation of the optional flue damper for controlling airflow and heat transfer.

Maintenance and Care

Surface Painting and Repair

Instructions for inspecting and repairing paint on indoor and outdoor surfaces.

Log Pan Care

Care and maintenance advice for the log pan, including ash management and cleaning.

Warranty Information