2. ROTATE THE HANDLEBAR FORWARD OR BACKWARD TO REPOSITION IT.
3. WHILE HOLDING THE HANDLEBAR IN THE NEW POSITION WITH ONE HAND, USE THE OTHER HAND TO PUSH THE LATCH
DOWN AND BACK INTO THE CLOSED LATCHED POSITION.
TROUBLESHOOTING: IF THE HANDLEBAR DOES NOT STAY SECURE WITH THE CLAMP CLOSED, YOU MAY NEED TO TIGHTEN
THE CLAMP. FIRST, PULL THE CLAMP LATCH OPEN. THEN, FINGER TIGHTEN THE KNOB BY TURNING IT CLOCKWISE FOR 1 2
ROTATIONS, AND RECLOSE THE CLAMP LATCH. IF YOU CANNOT CLOSE THE LATCH WITH EASE, THE KNOB MAY BE TOO
TIGHT. LOOSEN THE KNOB BY TURNING IT COUNTERCLOCKWISE.
LATCH
2
3
KNOB
(UNDERSIDE OF CLAMP)
To Next Page
Loading...
