Jetson BOLT Guide

21
1.2 Attaching the Seat
1. PULL OPEN THE LATCH ON THE SEAT CLAMP.
2. LOCATE THE “MINIMUM INSERTION” MARK ENGRAVED
NEAR THE MIDDLE OF THE SEAT POST.
3. LOWER THE SEAT POST THROUGH THE CLAMP AND INTO
THE SEAT TUBE, UNTIL THE “MINIMUM INSERTION” MARK
IS NO LONGER VISIBLE ABOVE THE CLAMP AND THE SEAT
IS AT A COMFORTABLE HEIGHT FOR THE RIDER.
NOTE: IF THE CLAMP OPENING IS TOO NARROW TO
RECEIVE THE POST, YOU CAN WIDEN IT BY TURNING THE
KNOB COUNTERCLOCKWISE.
SEAT POST
MINIMUM INSERTION MARK
CLAMP LATCH
SEAT CLAMP
CLAMP KNOB

Jetson BOLT Specifications

General

Motor Power	350W
Charging Time	4-5 hours
Foldable	Yes
Motor	350W
Max Rider Weight	120 kg
Brake	Disc Brake
Tires	8.5 inches
Max Load	120 kg
Brake Type	Disc Brake
Top Speed	25 km/h
Weight	14 kg