17
Machinedriving.........................................................................................................by tractor
Minimum tractor’s power to JF C40 e C60.............................................................. 40 to 80 hp
Minimum tractor’s power to JF C120.......................................................................50 to 80 hp
PTO speed.................................................................................................................540 rpm
Total approximated mass..............................................................................................600 kg
Estimated productive capacity:
JF C40, C60 e C120 w/ pulley...................................................................up to 28 ton/h
JF C120 w/ gearbox.................................................................................up to 28 ton/h
Cutting sizes.....................................................................................See table in sub-item 5.5
Noise level...................................................................................................................99,7Db
Speed of the chopping impeller
JF C40, C60 e C120 w/ pulley.........................................................................1472 rpm
JF C40, C60 e C120 w/ gearbox.....................................................................1658 rpm
Dimensions (see pictures below):
C (length)......................................................................................................2.420 mm
L (width)........................................................................................................2.400 mm
A1 (outlet chute height in work position).........................................................3.570 mm
A2 (height with the chute in transport position)...............................................2.100 mm
3.3- Technical specifications
L = 2.400mm
C = 2420mm
A1 = 3.570mm
A2 = 2100mm
OPERATION TECHNICAL MANUAL - HARVESTER JF C40 C60 and C120 SERIES 2
English
To Next Page
Loading...
