How to Connect
：
Note: The USB KVM Switch does not require any drivers or software.
1. Turn off both computers and their peripherals, and disconnect all power
cords.
2. Connect the shared keyboard, monitor, mouse, printer(optional), microphone
(optional) and speaker (optional) to the KVM Switch's console port.
3. Use the provided KVM and audio cables to connect your PC to your KVM
switch.
4. Turn ON the first computer and wait until startup completes.
5. Press the face panel button on the KVM Switch to select the second computer
(Optional).
6. Turn ON the second computer and wait until startup completes.
Your installation is now complete.
Diagram: (4 Port)
To Next Page
Loading...