Making connections simpler
08
Installation
・This device is not suitable for battery electric vehicles (BEVs) and hybrid
electric vehicles (HEVs).
・Use accessories specied by the manufacturer only.
・The standard supply for the device is DC9-30V, please use the original
power cable and ensure that the positive and negative ends are
correctly wired.
・Remove the protective lm on the remote camera prior to installation.
・It is recommended to ask a distributor, a designated business, or an
expert to do the installation and commissioning.
・Check visually whether the device is in good condition and whether the
relevant accessories are complete.
Device check
・Ensure that the device is ACC OFF before attaching a proper SIM card.
In addition, the SIM should have data service activated and not in
arrears.
To Next Page
Loading...
Need help?
General
