Power-On and -Off
Power-on: Press the power button for 3 seconds (prerequisite: the
battery switch is ON).
Power-off: Press the power button for 3 seconds.
Installing the Device
The device has a strong magnet built inside. It can attach to any
ferromagnetic material. The magnet makes the installation easy.
Or you can stick the 3M tapes on one side of the device bracket, and
attach the bracket to the target object, then put the device on the
bracket.
②Confirm thatthe battery
switch is off
③Insert the SIM
①Notch
To Next Page
Loading...
