JJC WT-868 - Wired Connection and Disconnection (Transmitter); Connecting WT-868 TX for Wired Operation; Disconnecting WT-868 TX from Camera

Connecting the WT-868TX:
 Turn the camera and WT-868TX off.
 Remove the remote socket cover from the camera.
 Insert the shutter release plug into the remote socket of camera.
 Insert the input plug into the ACC socket of WT-868TX.
 Turn the camera and WT-868TX on.
 Now you can start program the function and enjoy the timer trigger.
Disconnecting the WT-868TX:
 Turn the camera and WT-868TX off.
 Disconnect the shutter release plug from the camera body.
 Replace the remote socket cover.
 Disconnect the input plug from the WT-868TX.