5.Speaker
To ensure correct operation, choose an interval at least two seconds longer than the exposure
time. When using autofocus, set the delay to two seconds or longer and choose an interval at
least two seconds longer than the exposure time to ensure that the camera has time to focus.
When using long exposure noise reduction, the interval should be at least twice the exposure
time.
Intervals of 00:00:00 will automatically be reset to 00:00:01 when the SET button is pressed to put
settings into effect.
To set the number of shots to - - (unlimited), select 1 and press the arrow button down or select 999 and
press the arrow button up.
After adjusting all setting, press the SET button to put the new settings ENABLE. A beep will sound (If the
speaker is ON) and the “SET” icon indicator will go out.
To Next Page
Loading...
