JL Audio MX600/3 - Wiring Diagram; Connections; Power Connections; Inputs

Remote Turn-On
[FR–]
[FR+]
[SUB–]
[SUB+]
[FL–]
[FL+]
[SUB IN]
Source
[REM]
Battery
Fuse
(not included)
[+12V]
[GND]
[FRONT IN]
Power Connections
Label Wire Color Description
+12V Red Positive (+12V) Power Connection
GND Black Negative (GND) Ground Connection
REM Blue Positive (+12V) Remote Turn-On Input
Inputs
Label Plug Description
FRONT
IN
White RCA Ch. 1 / Front Left Channel Signal Input
Red RCA Ch. 2 / Front Right Channel Signal Input
SUB
IN
White RCA
Ch. 3 / Left Subwoofer
Channel Signal Input
Note: L & R Sub Inputs will be
combined to mono. If only one
channel of subwoofer signal is
available, we recommend using a
Y-adaptor to feed both Sub Inputs.
Red RCA
Ch. 4 / Right Subwoofer
Channel Signal Input
Outputs
Label Wire Color Description
FL+ White
Ch. 1
(+) Positive Front Left Speaker Front Bridged (+)
FL– White/Black (–) Negative Front Left Speaker
FR+ Gray
Ch. 2
(+) Positive Front Right Speaker
FR– Gray/Black (–) Negative Front Right Speaker Front Bridged (–)
SUB+ Lt. Blue
Ch. 3
(+) Positive Subwoofer Output
SUB– Lt. Blue/Black (–) Negative Subwoofer Output
Optional
Remote Bass
Control Jack
RJ11 Input Jack for M-RBC-1 or RBC-1 (each sold separately)
Connections
Power
Connections
Wiring Diagram
Outputs:
To Speakers
Inputs:
High-Level
< or >
Low-Level
(selectable via
Input Voltage
switch for each
channel pair)
Optional:
M-RBC-1
Remote
Bass Control
(sold separately)