What causes BMS fault code 05 - Overcurrent Charge in JLG Boom Lifts?
BMS fault code 05, "Overcurrent Charge," in JLG Boom Lifts can occur if the lithium pack is warm, one cell is at the maximum voltage, and the battery charger is suddenly connected, causing a current impulse to be supplied to the pack.
General| Brand | JLG |
|---|---|
| Model | X390AJ-X14J |
| Category | Boom Lifts |
| Language | English |
Details the Lithium ION system and safety precautions for machine operation.
Details Lithium Systems and Cell Features for various models.
Explains the 12V power system, its components and function.
Describes how the power pack components interact and function.
Details the functions and importance of the BMS in monitoring and managing the battery pack.
Provides characteristics and specifications of individual lithium battery cells.
Explains the function and operation of the battery pack's cooling system.
Details the heater system for 3rd generation battery packs.
Explains the function and operation of the battery pack charger.
Describes the function and purpose of various relays within the system.
Provides procedures for emergency activation of the electric motor.
Lists and explains error codes displayed by the battery system components.
Guides on diagnosing and resolving issues with 1st and 2nd generation battery systems.
Explains the use of the RamHino tool for system diagnostics and data analysis.
Describes how to start and use the logging function for system diagnostics.
To Next Page
